Genie Z-45/25 Operator's Manual
Hide thumbs
Also See for Z-45/25:
- Service manual (440 pages) ,
- Service and repair manual (255 pages) ,
- Operator's manual (64 pages)
Related Manuals for Genie Z-45/25
Summary of Contents for Genie Z-45/25
- Page 1 Operator’s Manual First Edition Supplement First Printing Part No. 82943 Cribbing Instructions...
- Page 2 Instructions for Use ............ 4 Copyright © 2003 by Genie Industries First Edition: First Printing, December 2003 "Genie" is a registered trademark of Genie Industries in the U.S.A. and many other countries. These machines comply with ANSI/SIA 92.5-1992 Printed on recycled paper Printed in U.S.A.
-
Page 3: Safety Rules
Use of plywood cribbing to elevated. NOTE: If the machine does not have a lock-out switch, contact your Genie dealer to order provide a level surface for safe a switch installation kit. -
Page 4: Construction Specifications
Cribbing Instructions First Edition • First Printing Construction Specifications • Cribbing is to be constructed of APA certified • Ramps are to be constructed in a series of plywood sheets. steps. Each step shall be a minimum of 12 inches long. •... -
Page 5: Workplace Inspection
First Edition • First Printing Cribbing Instructions Workplace Inspection Be aware of and avoid the following hazardous situations when using cribbing: • unstable surfaces that could shift under cribbing • surfaces that cannot support the cribbing (refer to the floor loading specifications in the operator's manual) Observe and Obey: •... -
Page 6: Instructions For Use
6 Operate the machine lift function according to 2 Make sure the Genie aerial lift has been the instructions in the appropriate operator's modified with a lock-out switch that disables the manual.