Debug Mac-Notification - Cisco IE-3000-8TC Command Reference Manual

debug mac-notification

debug mac-notification
Use the debug mac-notification privileged EXEC command to enable debugging of MAC notification
events. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug mac-notification command is the same as the no debug mac-notification command.
Related Commands Command
show debugging
show mac
address-table
notification
Cisco IE 3000 Switch Command Reference
B-18
debug mac-notification
no debug mac-notification
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the MAC address notification information for all interfaces or the
specified interface.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01