Moving Telephones; Stopping Calls From Ringing At Your Telephone Using Do Not Disturb (Dnd); Stopping Calls; Refusing To Answer A Call - Nortel M7410 Installation And Maintenance Manual

Telephone names and line names can contain both letters and numbers, but cannot
be longer than seven characters. You cannot use the # and * symbols.

Moving telephones

If automatic telephone relocation is enabled in programming by your installer, you
can move your telephone from one Enterprise Edge jack to another without losing
any of its custom programming.
Stopping calls from ringing at your telephone using Do Not Disturb
(DND)
ƒ°fi

Stopping calls

Press
ƒ°fi
Only priority calls ring at your telephone. A line button flashes when you receive a
call, but the call does not ring.

Refusing to answer a call

While you are on a call, you can refuse to answer a second call (including a priority
call).
Press
ƒ°fi

Canceling Do Not Disturb

ƒ£°fi
Press
ƒ£°fi
P0908510 Issue 02
Tip
You can give the same name to two or more telephones, or to a telephone and
a line in your system. To avoid confusion, avoid such duplication. Use
initials, abbreviations, or even nicknames to give each telephone a unique
name.
If automatic telephone relocation is turned on, the name and internal number
of a telephone are saved if the telephone is moved within your system.
You may be required by law to report any telephone moves to your local
telecommunications carrier or 911 service provider. For further details,
consult your local carrier, your local 911 service provider, and/or your local
telecommunications service provider.
to stop calls from ringing at your telephone.
while your telephone is ringing.
.
Enterprise Edge Feature Programming Telephone Guide
Telephone features 87