Canceling Line Redirection; Allowing A Telephone To Redirect Calls; Turning The Redirect Ring For A Telephone On Or Off - Nortel Enterprise Edge 2.0 Manual

Canceling Line Redirection

Ä£¡Ý
Ä£¡Ý
1. Press
2. Select the lines you no longer want to redirect.

Allowing a telephone to redirect calls

You can turn a telephone's ability to redirect calls on and off.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge 2.0 Programming Operations Guide.

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200 milliseconds) when you redirect
a call on one of its lines.
You need to start a Unified Manager session to program this feature. For more
information about programming using the Unified Manager, see the Enterprise
Edge 2.0 Programming Operations Guide.
P0911589 Issue 03
Tip
You can continue to use the line selected for redirecting calls on other lines
when the line is not busy on a redirected call. To avoid redirection failing
because the selected line is in use, select a line pool with several lines in it.
The system does not check that the number you give for line redirection is a
valid one. If you redirect to an invalid number, redirection fails. To avoid a
redirections failure, use an autodial button to enter the redirection number.
You must program autodial buttons used for line redirection to use a specific
line.
.
Tip
If a telephone has redirect ring enabled, it rings briefly for redirected calls on
one of its lines when another telephone set up the line redirection.
Enterprise Edge 2.0 Feature Programming Telephone Guide
Forwarding your calls 55