Turning The Redirect Ring For A Telephone On Or Off - Nortel Modular ICS 6.0 Manual

112 / Forwarding your calls

Turning the redirect ring for a telephone on or off

You can program a telephone to ring briefly (200
milliseconds) when a call is redirected to one of the lines
assigned to it.
You need the programming template found at the front of this
guide. See Getting started with Norstar on page 13 for more
information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ≠ and enter the internal number of the
telephone you want to program.
4. Press ≠ twice.
5. Press " three times. The display reads
Redirect ring:.
6. Press CHANGE to select Y (Yes) or N (No).
Tip -
for redirected calls on one of its lines even if another telephone
set up the line redirection.
Displays while redirecting lines
Intercom
Line Redirection
QUIT ADD
Modular ICS 6.0 System Coordinator Guide
(the default System Coordinator
If a telephone has redirect ring enabled, it rings briefly
You selected the intercom button as the
facility to place the call on. Enter a line pool
code or a destination code.
Press
£
REMOVE
or REMOVE to cancel a previous
redirection.
.
¥
or ADD to begin redirection. Press
P0992640 03