Snmp Mib Support; Snmp Trap Support - Nortel BayStack 410 24T Using Manual

SNMP MIB Support

The BayStack 410-24T switch supports an SNMP agent with industry standard
MIBs, as well as private MIB extensions, which ensures compatibility with
existing network management tools. The BayStack 410-24T switch supports the
MIB-II (RFC 1213), the Bridge MIB (RFC 1493), and the RMON MIB (RFC
1757), which provide access to detailed management statistics.
For a complete listing of supported MIBs, see "Features" on
For details on SNMP trap support, see
section.

SNMP Trap Support

The BayStack 410-24T switch supports an SNMP agent with industry standard
SNMPv1 traps, as well as private SNMPv1 trap extensions
Table 1-3. Supported SNMP Traps
Trap Name
RFC 1215 (Industry Standard):
linkUp
linkDown
authenticationFailure
coldStart
warmStart
s5Ctr MIB (Nortel Networks Proprietary Traps):
s5CtrUnitUp
s5CtrUnitDown
s5CtrHotSwap
s5CtrProblem
309985-B Rev 00
Configurable Sent when:
Per port A port's link state changes to up.
Per port A port's link state changes to down.
System wide There is an SNMP authentication failure.
Always on The system is powered on.
Always on The system restarts due to a management reset.
Always on A unit is added to an operational stack.
Always on A unit is removed from an operational stack.
Always on A unit is hot-swapped in an operational stack.
Always on An assigned base unit fails.
Introduction to the BayStack 410-24T Switch
"SNMP Trap Support" following this
page 1-9.
(Table 1-3).
1-21