Removal / Installation (Rzr 4) - Polaris RZR 800 2013 Manual

5. Pull sharply forward to remove it from transmission
shaft.
NOTE: You may have to loosen the front
gearcase mounting bolts to allow for propshaft
removal.
6. Remove the fasteners retaining the plastic skid plate
and remove the skid plate from the vehicle.
7. Remove the propshaft from the vehicle.
8. Reverse removal steps to reinstall propshaft.
IMPORTANT: Use a
reassembly.

Removal / Installation (RZR 4)

1. Locate the propshaft roll pin and use the Roll Pin
2. Remove both front seats.
3. Remove the gear selector cap.
NEW roll pin upon
4. Remove the retaining screw and the gear selector
5. Remove the fasteners retaining the center console to
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
Removal Tool (PN 2872608) to remove the roll pin.
NOTE: Front wheel can be removed to gain
better access to the propshaft roll pin.
Roll Pin Removal Tool (PN 2872608)
handle.
access the propshaft support bearing.
FINAL DRIVE
7
7.15