Changing The Scan Settings - Fuji Xerox DocuCentre-II 2055 User Manual

2
Select the job to cancel, and then
select [Stop].

Changing the Scan Settings

You can change the scan settings while scanning the document.
1
Select [Next Original].
2
Select [Change Settings...].
3
Set [Scan Resolution], [Original Size], [2 Sided Originals], [Lighten/Darken], and
[Original Type].
For each setting, refer to "Scan Resolution (Specifying a Scanning Resolution)" (P.194), "Original Size
(Specifying an Original Size)" (P.196), "2 Sided Originals (Scanning Both Sides of a Document)"
(P.194), "Lighten/Darken (Adjusting the Scan Density)" (P.185), and "Original Type (Selecting the
Document Type)" (P.187).
4
Press the <Start> button.
Operations during Scanning
173
5