Esc/P Emulation Print Features; Esc/P Emulation Settings - Fuji Xerox DocuCentre-II 2055 User Manual

ESC/P Emulation Print Features

Multiple-Up
The multiple-up feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The multiple-up feature can be used in the ESC/P emulation mode. In the ESC/P mode,
2 Up can be used.
Form Overlay
In the ESC/P mode, you can register an original form to the printer, and overprint it on
a printed output.
A form to be overprinted can be specified on the control panel.
Barcodes
In the ESC/P mode, you can use barcodes. The barcodes that can be used are as
follows.
JAN code
CODE39
CODABAR
Industrial 2 of 5
Industrial 2 of 5
Interleaved 2 of 5
Forms
You can use ESC/P to register forms on the machine. Up to 64 forms can be registered.

ESC/P Emulation Settings

The following tables show the basic and extended settings that can be configured on
the ESC/P emulation mode menu.
Basic Settings
Item
Setting Item
Number
Paper tray 3 Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5 (Bypass)
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important • When Tray 1, 2, 3, or 4 is selected, the size of paper loaded in the
tray becomes the output paper size, and thus [Paper Size] cannot be
set.
Note • When [Auto] is selected, and if the paper of the same size is loaded in
the same orientation in multiple trays, paper will be supplied in the
order of Tray 1
is loaded in multiple trays but in different orientations, the paper
loaded in the landscape orientation is given priority.
Value
Tray 2 Tray 3 Tray 4. If paper of the same size
ESC/P Emulation
17
549