Network Scanning - Fuji Xerox DocuCentre-II 2055 User Manual

Network Scanning

You can scan documents after specifying a file (job template) saving scanning
conditions, information on the forwarding destination server and others.
Job templates can be created on CentreWare Scan Service. Scanned data is
converted to the format specified in a job template, and is automatically sent to a
server. The machine automatically gets job templates from the server.
For information on CentreWare Scan Services, refer to the CentreWare Scan Services Installation
Guide.
Note • CentreWare Scan Services (optional) is required to use this feature.
1
Select [Network Scanning] on the
[All Services] screen.
2
Select a job template.
Job Template
Select a job template that has the
scan conditions you want.
Note • Select [
Go to
Use the numeric keypad to enter a 3-digit job template number. The job template then
appears at the top of the list.
Template Description
Displays the [Template Description] screen. The screen displays the description of the
job template.
Refer to "[Template Description] screen" (P.181).
Refresh
Refreshes the information. If a created job template has not been displayed, selecting
[Refresh] will display the job template.
[Template Description] screen
This screen displays the description of a job template. The description only appears if
it has been set during the creation of the job template.
1
Select a job template, and select
[Template Description].
] to return to the
previous screen or [ ] to move to the next screen.

Network Scanning

5
181