12 Job Status
Print Quantity
Allows to specify the number of print.
Note
Sample Print
This section describes how to print or delete documents stored with the Sample Print
feature.
After a sample copy is output, the remaining copies will automatically be output if the
machine is left uninstructed for the period specified under [Auto Job Release]. You can
change the value of [Auto Job Release] as necessary.
For information on sample print operations, refer to the print driver's help.
Note
12
For more information, refer to "Charge / Private Print Settings" (P.357).
1
Select [Sample Print].
2
Select the user to be checked, and
select [Document List].
Note
3
Select the document to be printed
or deleted.
4
Select any item.
Select All
Selects all documents. To deselect all the documents, select this button again.
Delete
Deletes the selected document.
Refer to "When [Delete] is Selected" (P.373).
Print
Prints a Sample Print document. After printing the remaining sets of the document, the
stored Sample Print document is deleted.
Refer to "When [Print] is Selected" (P.373)
372
• [Print Quantity] is disabled when you use [Select All] to select all documents.
• When you select [Print and Save], the setting of [Print Quantity] is also saved.
• When you have selected [Save in Private Charge Print] or [Save in Charge Print] for
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Sample
Print] under [Stored Documents] even if you select [Sample Print] on the print driver.
• Select [Refresh] to display the
updated information.
• Select [
] to return to the previous screen or [
• Entering a 3-digit user ID with the numeric keypad specifies the user directly.
] to move to the next screen.