F Code (Using F Code Transmission) - Fuji Xerox DocuCentre-II 2055 User Manual

4 Fax
Format for Auto Send (DTMF Method)
1
Select [Keyboard] to display the keyboard on the touch screen and enter the following
format.
Format for Manual Send (DTMF Method)
1
Select the [On-hook (Manual Send/Receive)] button on the [Advanced Features]
screen to display the keyboard on the touch screen and enter the following format.
Note
4

F Code (Using F Code Transmission)

F Code is the transmission procedure set by the Communications and Information
Network Association of Japan and is the T.30 (communication protocol) method for
using sub-addresses that was standardized by the ITU-T. The F Code feature enables
various features to be used with transmission among F Code-compatible machines
manufactured by different companies.
When using F Code transmission, use an F Code and password. The F Code, which is
also called a sub-address by other companies, must be registered (entered). Set the
password if necessary.
Note
You can use the following features with F Code transmission.
Sending to Mailbox (F Code Method)
When a mailbox is set on a remote machine, you can send a document directly to the
mailbox by specifying the F code (sub-address) and password (if set up) of the mailbox.
Obtain the F Code (sub-address) and password of the destination mailbox in advance.
142
• Use the keyboard on the touch screen to enter symbols such as "!" and "∗". For information
on the input method, refer to "Entering Text" (P.273).
• Enter the password if necessary.
• You can transmit to any machine that supports our DTMF method feature.
• The above dialing format can be registered in address number to enable private polling
using an address number. For information on how to register address numbers, refer to
"Address Book" (P.343).
• This feature is not available for Fax Server except when an F code is included in a dialing
number.
• To use the F Code feature, you need to confirm the F Code of the recipients machine in
advance.
• You can set the F Code and password for each address number. For information on how to
register address numbers, refer to "Address Book" (P.343).
• You can use Relay Broadcast/Remote Relay Broadcast with F Code transmission. For
information on Relay Broadcast, refer to "Relay Broadcast (Transmitting Documents
Through a Relay Station)" (P.151). For information on Remote Relay Broadcast, refer to
"Remote Relay Broadcast (Performing Relay Broadcast to Remote Locations)" (P.155).
• We recommend using the fax signal method for sending to a mailbox or private polling when
the recipient is using the same model of machine.