Fuji Xerox DocuCentre-II 2055 User Manual page 314

11 System Settings
Print User ID
When printing using a print driver, specify whether to print user identification information on
paper. The first 64 letters of the user information is printed.
Select a position to print from [Top Left], [Top Right], [Bottom Left], and [Bottom Right].
Note
Banner Sheet
Select whether to output banner sheets to separate different outputs.
A user name and document name are printed on a banner sheet.
Note
11
Off
Does not print banner sheets.
Start Sheet
Prints a banner sheet before a print job.
End Sheet
Prints a banner sheet after a print job.
Start Sheet & End Sheet
Prints a banner sheet before and after a print job.
Banner Sheet Tray
Set the paper tray used for banner sheets.
Select from [Tray 1] to [Tray 4].
PostScript Paper Supply
Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or
disabled.
Note
PostScript Font Absence
Set the action to be taken when a PostScript font specified in a job is not present.
Note
Cancel Printing
Cancels printing.
Substitute Font and Print
Continues printing, using a substitute font. Courier is used as the substitute font.
PostScript Font Substitution
Set whether to use ATCx as a substitute if a PostScript font specified in a job is not present.
Note
312
To use the Print User ID feature, the user ID must be set on the print driver
•
beforehand. For more information, refer to the print driver's online help.
When user authentication information is not available, "Unknown User" is printed.
•
• Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printed, banner sheets are counted by meter.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.