Fuji Xerox DocuCentre-II 2055 User Manual page 547

Document Feeder Specifications
Document feeder type
Document size/type
Number of originals held
Original changing speed
Dimensions/Weight
B-Finisher Specifications
Tray type
Paper size/Supported
paper
Tray capacity
Staple
Dimensions/Weight
Space requirements
(when connected to the
main unit)
Duplex automatic document feeder
Maximum: 297mm×432mm (A3, 11×17"), 297×600mm
Minimum : 139.7×210mm (A5, 5.5x8.5")
* When using the fax feature. Only one set is available for a long
document of more than 432 mm. The paper type of the document is 60
2
- 128g/m .
2
38 - 128g/m (2-sided: 50 - 128g/m
75 sheets
Important • When using Xerox P paper
<DocuCentre-II 3005>
Copy : 34.6 sheets/minute (A4
Scan/Fax : 50 sheets/minute (A4
<DocuCentre-II 2055/2005>
Copy : 29 sheets/minute (A4
Scan/Fax : 50 sheets/minute (A4
* For fax, this value is based on when [Rotate 90 Degrees] is set
to [No] and [Resolution] is set to [Standard] or [Fine].
Width 560.0 × Depth 517.0 × Height 123.0mm, 10.0kg
Finisher tray × 1: Collate (offset stacking available)/ Stack (offset
stacking available)
Maximum: A3, 11x17", Minimum: B5
2
64 - 105g/m
A4: 1,000 sheets, B4 or larger: 500 sheets, Mixed stack*: 300
sheets
* Larger size paper is stacked on top of smaller size paper.
Important • When using Xerox P paper
Maximum stapled sheets:50 sheets (64g/m
Paper size : Maximum A3, 11x17" / Minimum B5
Stapling position : 1 place (front/back, angled stapling),
Important • When using Xerox P paper
Width 566 × Depth 584 × Height 940mm, 30kg
Width 2,140 × Depth 1,180mm (main unit + B-Finisher)
Specifications
2
)
1-sided)
1-sided)*
1-sided)
1-sided)*
2
or less)
2 places (parallel stapling)
*
17
545