Table of Contents
Advertisement
16 Problem Solving
Error Code
016-750
016-751
016-752
16
016-753
016-755
016-756
016-757
016-758
016-759
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
476
Category
C P F S M O
O
[Cause]
[Remedy] Check if you are correctly using the application (such as
O
[Cause]
[Remedy] For Cause 1: Use the print driver to print the document.
For information on the memory, refer to "Allocate Memory" (P.308).
O
[Cause]
[Remedy] Change the [Print Mode] setting from [High Image Quality]
O
[Cause]
[Remedy] Set the correct password on ContentsBridge.
O
[Cause]
[Remedy] Cancel the print protection using Adobe Reader, and try to
O [Cause]
[Remedy] Check with your System Administrator.
O [Cause]
[Remedy] Enter the correct password.
O O O O
[Cause]
[Remedy] Check with your Auditron Administrator.
O O
O
[Cause]
[Remedy] Check with your Auditron Administrator.
Cause and Remedy
The machine received a PDF and a printing job ticket from
an application that allows to directly send PDF (such as
"ContentsBridge 5.0"), but the printing job ticket data had a
grammar or print instruction unsupported by this machine.
"ContentsBridge 5.0") and if the print instruction was
correct. If your application usage and print instruction are
correct, check with the application manufacturer for
operations of the application. If the problem persists, have
a printer settings list, a job history report, and the print data
with the printing job ticket ready, and contact our Customer
Support Center.
1. During the PDF Bridge processing, one of the following
occurred: a syntax or parameter error occurred; an
undefined command was used; and a PDF file was
damaged.
2. When [Print Processing Mode] for the PDF Direct Print
feature has been set to [PS]: Cause 1 or insufficient
memory.
For Cause 2: Take one of the following actions:
Use the print driver to print the document.
Expand the PostScript memory.
Unable to process for PDF Bridge due to insufficient
memory space.
to [Normal], or from [Normal] to [High Speed]. Or, add
memory.
The entered password does not agree with that of the PDF
file.
Attempted to process a print protected PDF file.
print again.
No permissions to use the service.
The password is incorrect.
No permissions to use the service.
The number of pages reached the maximum number of
pages for this service.
- Quick Links:
- Print Driver
Hide quick links:
Advertisement
Table of Contents
