Fuji Xerox DocuCentre-II 2055 User Manual page 305

Secondary Server IP Address
Enter the secondary server IP address using values from 0 to 255.
Note • You can set this item when [Secondary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX through 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
Secondary Server Name
Enter the name of the secondary server. Up to 64 characters are allowed.
Note • You can set this item when [Secondary Server Setup] is [By Server Name].
Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
Authentication Method
Select the method for LDAP authentication from [Direct Authentication] and [Authentication of
User Attributes].
When selecting [Authentication of User Attributes], the machine searches a user name as
[Attribute of Typed User Name] on the directory server, and converts the attribute set in
[Attribute of Login User Name] of the user name found into the user name for LDAP
authentication.
Attribute of Typed User Name
When [Authentication of User Attributes] is used for LDAP authentication, set an attribute of a
user name input. Up to 32 characters are allowed.
Attribute of Login User Name
When [Authentication of User Attributes] is used for LDAP authentication, set an attribute of a
user name to be authenticated. Up to 32 characters are allowed.
Use Added Text String
When [Authentication of User Attributes] is used for LDAP authentication, select whether to
use additional text strings for the user name.
Text String Added to User Name
Enter text strings for [Text String Added to User Name]. You can use up to 64 characters.
Search Login Name
Set a login name for address book search and access to the directory server by
[Authentication of User Attributes] of LDAP authentication. However, set this item only when
authentication is required for the directory service. Do not make the setting when
authentication is not required.
When setting the login name, you can enter up to 255 characters.
Search Password
Set a password for address book search and access to the directory server by [User Attribute
Authentication] of LDAP authentication. However, set this item only when authentication is
required for the directory service. Do not make the setting when authentication is not
required.
When setting the password, you can enter up to 32 characters.
Search Root Entry DN
Enter the search root character string with up to 255 characters.
Scope of Search from Root Entry
Select the search range from the search root.
Root entry only
Searches the root level only.
One level below root entry only
Searches from the root, as far as one level below.
All levels below root entry
Searches from the root, including all levels below.
Network Settings
11
303