Copying Procedure; Step 1 Loading Documents - Fuji Xerox ApeosPort-IV C5575 User Manual

3 Copy

Copying Procedure

This section describes the basic copy procedures. The following shows the reference section
for each procedure.

Step 1 Loading Documents

The following two methods are available to load documents:
Document Feeder (optional)
Single sheet
3
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 432 mm (Standard size: A3, 11 x 17").
The document feeder automatically detects standard size documents. For non-standard size
documents, enter the size on the [Original Size] screen.
Note
For information on document sizes that can be detected automatically and how to enter a non-standard document size,
refer to "Original Size (Specifying the Scan Size for the Document)" (P.115).
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the System
Administration mode. For information on [Paper Size Settings], refer to "5 Tools" > "Common Service Settings" > "Other
Settings" > "Paper Size Settings" in the Administrator Guide.
The document feeder accepts the following number of sheets.
Lightweight paper (38 - 49 gsm)
Plain paper (50 - 80 gsm)
Heavyweight paper (81 - 128 gsm)
Important • To avoid paper jams, use the document glass for folded or wrinkled documents,
76
Step 1 Loading Documents ..........................................................................................................................................................76
Step 2 Selecting Features .............................................................................................................................................................78
Step 3 Entering a Quantity...........................................................................................................................................................79
Step 4 Starting the Copy Job .......................................................................................................................................................80
Step 5 Confirming the Copy Job in Job Status.........................................................................................................................81
• The document feeder is optional for some models. For more information, contact our Customer
Support Center.
Document Type (Weight)
cut-and-pasted documents, curled paper, or back carbon paper.
• When Duplex Automatic Document Feeder B1-C is installed, the lightweight paper of 38 - 49 gsm
cannot be scanned 2 sided.
Number of Sheets
Duplex Automatic Duplex Automatic
Document Feeder Document Feeder
B1-C
110 sheets
110 sheets
75 sheets
B1-PC
130 sheets
130 sheets
85 sheets