Fuji Xerox DocuCentre-II 2055 User Manual page 567

Parameter Item No.
Symbol Set 208
Font Size 209
Font Pitch 210
Form Line 211
Print Sets 212
Image Enhance 213
Hex Dump 214
Draft Mode 215
Binding 217
Line Termination 218
Default Custom 219
Paper Size (Short edge)
220
(Long edge)
0 (Default): Roman 8
1: ISO 8859-1 Latin 1
2: ISO 8859-2 Latin 2
3: ISO 8859-9 Latin 5
4: ISO 8859-10 Latin 6
5: PC-8
6: PC-8 DN
7: PC-775
8: PC-850
9: PC-852
10: PC-1004 (OS/2)
11: PC Turkish
12: Windows 3.1 Latin 1
13: Windows 3.1 Latin 2
14: Windows 3.1 Latin 5
15: DeskTop
16: PS Text
17: MC Text
400 - 5000 (Default: 1200): Specifies the point size of a font in increments
of 25. The value of 100 represents 1 point.
600 - 2400 (Default: 1000): Specifies the pitch size of a font. The value of
100 represents the pitch size of 1.
5 - 128 (Default: 64 or 60*): Specifies the number of lines on a page.
* The default value will be [64] if the default value of the item 202/203 is
[4]; [60] if the value for 202/203 is [23].
1 - 999 (Default: 1): Specifies the number of print sets.
0: Off
1 (Default): On
Sets whether to enable the enhanced image mode.
0 (Default): Off
1: On
Sets whether to enable hex dump.
0 (Default): Off
1: On
Sets whether to enable the draft mode.
0 (Default): LEF
1: SEF
Specifies which edge of paper is to be bound.
0 (Default): Off
1: Add-LF (Appends an LF to CR)
2: Add-CR (Appends a CR to LF and FF)
3: CR-XX (Appends a CR to LF and FF, and LF to CR)
2100 (Default short-edge value): 210.0 mm
2970 (Default long-edge value): 297.0 mm
0 to 9999: 0 to 999.9 mm
Specifies the default custom paper size.
PCL Emulation
Value
18: Microsoft Publishing
19: Math 8
20: PS Math
21: Pi Font
22: Legal
23: ISO 4 United Kingdom
24: ISO 6 ASCII
25: ISO 11 Swedish:names
26: ISO 15 Italian
27: ISO 17 Spanish
28: ISO 21 German
29: ISO 60 Norwegian v1
30: ISO 69 French
31: Windows 3.0 Latin 1
32: Windows Baltic
33: Symbol
34: Wingdings
17
565