Fuji Xerox DocuCentre-II 2055 User Manual page 470

Hide thumbs Also See for DocuCentre-II 2055:
Table of Contents

Advertisement

16 Problem Solving
Error Code
016-526
016-527
016-533
016-534
016-539
16
016-546
016-574
016-575
016-576
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
468
Category
C P F S M O
O
[Cause]
[Remedy] Set the same LDAP server address to the machine and to
O
[Cause]
[Remedy] Software has a problem. Contact our Customer Support
O [Cause]
[Remedy] The time difference between the machine and the
O [Cause]
[Remedy] The realm set on the machine does not exist on the
O [Cause]
[Remedy] An error occurred on the software. Contact our Customer
O [Cause]
[Remedy] Contact our Customer Support Center.
O
[Cause]
[Remedy] Check the connection to the DNS server. Check if the FTP
O
[Cause]
[Remedy] Specify the correct DNS server address. Or, specify the
O
[Cause]
[Remedy] Ensure that both the destination FTP server and the
Cause and Remedy
LDAP server SSL authentication error. The server name
does not match the certificate.
the SSL certificate of the LDAP server. This error can be
cleared if you select [Off] for [LDAP - SSL/TLS
Communication] under [SSL/TLS Settings] on the
machine; however, note that selecting this option will not
ensure the validity of the LDAP server.
LDAP server SSL authentication error. This is an SSL
authentication internal error.
Center.
Kerberos server authentication protocol error
Kerberos server exceeded the clock skew limit value set
on the Kerberos server. Check if the clocks on the
machine and Kerberos server are correctly set. Also
Check the settings of the summer time and the time zone
as well on the machine and Kerberos server.
Kerberos server authentication protocol error
Kerberos server, or the Kerberos server address set on
the machine is invalid for connection. Check if the realm
name and the server address have been correctly set on
the machine. For connection to Windows 2000 or Windows
2003 Server, specify the realm name in uppercase.
Kerberos server authentication protocol error
Support Center.
A general user tried to obtain the information of another
user.
The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the host or server name of
the FTP server could not be resolved.
server name is registered correctly on the DNS server.
The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the DNS server address was
not registered.
destination FTP server using its IP address.
The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because it could not connect to the
FTP server.
machine are available for network communications, by
checking the following:
The IP address of the server is set correctly.
The network cables are plugged in securely.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-ii 3005Docucentre-ii2005

Table of Contents