Machine Installation - Fuji Xerox DocuCentre-II 2055 User Manual

This equipment is to be used on a branch circuit or outlet that has larger
capacity than rated ampere and voltage of this machine. See data plate on the
rear panel for the rated ampere and voltage of this equipment.
Never touch a power cord with wet hands. It can cause electric shocks.
Do not place objects on the power cord.
Always ensure the plug connection is free of dust.
In a damp environment, a contaminated connector can draw a significant
amount of current that can generate heat and eventually cause fire over an
extended period of time.
Only use the power cord supplied with the equipment.
Do not use it on any other power source, doing so can cause fire, electric
shocks or machine faults.
Using a different power cord may cause fire or electric shock. Do not use
power cord supplied with the equipment on any other equipment.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power
cord. A damaged cord can cause fire or electric shocks.
If the power cord is broken or insulated wires are exposed, ask your Fuji Xerox
Customer Support Center for a replacement. Using a damaged cord can cause
fire or electric shocks.
Before cleaning this product, ensure to switch off and unplug the product from
the electrical outlet. Access to a live machine interior can cause electric
shocks.
Do not unplug or replug the machine while it is switched on. Unplugging a live
connector can deform the plug and cause fire.
When unplugging the machine, grasp the plug instead of the cord. Pulling on
a cord can damage the cord and cause fire or electric shocks.
Always switch off and unplug the machine when it is not used over weekends
or long holidays.
Once a month, unplug the machine and check the power cord for the following:
If you notice any unusual conditions, contact your Fuji Xerox Customer
Support Center.

Machine Installation

Do not place this equipment where people might step on or trip over the power
cord.
The power cord is plugged firmly into a receptacle.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.
Safety Notes
1
19