Fuji Xerox DocuCentre-II 2055 User Manual page 476

16 Problem Solving
Error Code
016-721
016-722
016-725
016-726
16
016-727
016-728
016-729
016-731
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
474
Category
C P F S M O
O O [Cause]
[Remedy] For Cause 1: When printing by automatic tray selection,
Refer to "Paper Type Priority" (P.280).
O [Cause]
[Remedy] Check the staple position and the paper size, and try to
O [Cause]
[Remedy] Do not use the Job Flow feature. Simply scan the
O [Cause]
[Remedy] For Cause 1:An Adobe PostScript 3 Kit must be installed.
O [Cause]
[Remedy] The document could not be stored into the mailbox
O [Cause]
[Remedy] Check the print data.
Refer to "Layout Adjustment" (P.194).
O [Cause]
[Remedy] Change the number of colors/resolution for the TIFF file,
Refer to "Layout Adjustment" (P.194).
O [Cause]
[Remedy] Retry printing.
Cause and Remedy
An error occurred during print processing. Probable
causes are as follows:
1. Printing was instructed by [automatic tray selection]
when [Paper Type Priority] is set to [Automatic Tray
switching Off] for all paper in the [Common Settings].
2. ESC/P command error
set one of the paper types to a setting other than
[Automatic Tray switching Off] in [Paper Type Priority].
For Cause 2:Check the print data.
The specified staple position or the specified paper size is
not supported in the finisher.
print again.
A scanned document stored in a mailbox was to be sent by
fax using the Job Flow feature, but the mailbox document
could not be converted to fax data.
document through the machine's [Fax] screen to send it by
fax.
Unable to automatically select a printer language even
though the print mode is set to [Auto].
Probable causes are as follows:
1. PostScript data was sent with no Adobe PostScript 3 Kit
(optional) installed.
2. The PDF file was sent directly to the machine using LPR
with Adobe PostScript 3 Kit installed and no HDD
Extension Kit installed.
For Cause 2:A HDD Extension Kit must be installed.
A job was cancelled without storing a document into a
mailbox because the document was determined as 0
page.
because the machine determined the print document as 0
page. Disable [Skip Blank Pages] on the Print Options
setting, or add text to the document if the document is
blank.
An unsupported tag is included in the TIFF file.
Unable to print because the number of colors or the
resolution of the TIFF file is out of allowed range.
and try again.
Unable to print TIFF data because it was interrupted.