Step 5 Setting A Feature; Step 6 Exiting The System Administration Mode - Fuji Xerox DocuCentre-II 2055 User Manual

11 System Settings
Scan Mode Settings
Set the scanner feature defaults, button indications, and so on.
For more information, refer to Scan Mode Settings (P.313).
Fax Mode Settings
Set the fax feature defaults, fax operation control, button indications, and so on.
For more information, refer to Fax Mode Settings (P.317).
E-mail/Internet Fax Settings
Set the e-mail and iFax feature defaults, address search, and so on.
For more information, refer to E-mail/Internet Fax Settings (P.327).
Mailbox/Stored Document Settings
11
Set how to delete documents stored in mailboxes and how to delete print documents
stored in the machine.
For more information, refer to Mailbox/Stored Document Settings (P.330).
Job Flow Settings
Set the settings relating to job flows.
For more information, refer to Job Flow Settings (P.333).
Setup Menu
You can create mailboxes and job flow sheets, and can create and change an address
book (address numbers).
For more information, refer to Setup Menu (P.334).
System Administrator Settings
You can set the system administrator ID and system administrator passcode for
entering System Administration mode.
For more information, refer to System Administrator Settings (P.351).
Login Setup/Auditron Administration
You can set restrictions on users using features of the machine, or administer jobs by
user.
For more information, refer to Login Setup/Auditron Administration (P.353).

Step 5 Setting a Feature

1
Set any feature.
2
After setting the feature, select [Save].

Step 6 Exiting the System Administration Mode

1
When the settings are completed,
select [Close] until the [System
Settings] screen appears.
2
Select [Exit].
260