Entering Specific Symbols; Removing/Confirming Specified Recipient - Fuji Xerox DocuCentre-II 2055 User Manual

Entering Specific Symbols

When specifying a recipient, you can use the following features to enter specific
symbols from the touch screen.
Feature
Enter pause
Transmit using a
password
Transmit DTMF
signal
Transmit PB
(from dial pulse
to tone)
Note • When using the DTMF method, use specific symbols. For information on the DTMF method,

Removing/Confirming Specified Recipient

You can remove or confirm recipients using the pop-up menu.
1
Select the recipient to be removed
or confirmed from [Address/
Recipient].
2
Select any item from the pop-up
menu.
Remove
Removes the recipient.
Details...
The [Recipient Details] screen is displayed. You can confirm recipients or address
numbers.
Cancel
Hides the pop-up menu.
Button
- or
<Pause> (-)
S
!
:
refer to "Remote Mailbox (Using Remote Mailbox)" (P.140), and "Broadcast" (P.151).
Function
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. by additional button
presses.
When a password has
been set, transmission
will only start if the
password matches the
ID number on the remote
terminal.
Use to transmit the
DTMF signal.
Switches the dial type
from pulse to tone when
the Fax service is used.
Fax/Internet Fax
Input method
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
1. Select [Keyboard] in
the [Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
1. Select [Keyboard] in
the [Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#
1. Select [Tone (:)] on
the [On-hook] or [Off-
hook] screen.
121
4