Changing The Number Of Copies; Interrupting The Copy Job - Fuji Xerox DocuCentre-II 2055 User Manual

3 Copy
2
Select the job to cancel, and then
select [Stop].

Changing the Number of Copies

You can change the number of copies that is set initially during scanning or copying the
document.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
3
2
Select [Change Quantity...].
3
Set the number of copies with the numeric keypad. The new quantity must include the
number of copies that have already been printed. When reducing the quantity, you
cannot enter a number less than the number of copies that have already been printed.
4
Press the <Start> button.

Interrupting the Copy Job

You can temporarily suspend the current continuous copy job to give another job higher
priority.
1
Press the <Interrupt> button.
Note
56
• The interrupt indicator lights
up to indicate that the
machine is in the job interrupt
mode.
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
<Stop> button
<Interrupt>
button