3
Enter the value for Y1 in [Y1] using the numeric keypad, and select [Next].
4
Enter the value for X2 in [X2] using the numeric keypad, and select [Next].
5
Enter the value for Y2 in [Y2] using the numeric keypad, and select [Next].
Note
• To change the coordinates you have entered, select [Next], move
value again.
• If all of [X1], [Y1], [X2], and [Y2] are set to [0], the area will be invalid. If no other area is
specified, the Delete Outside/Delete Inside feature cannot be used.
• If you select <C> button, values that the
Clear Area 1
Clear the specified area.
Next
The
mark moves to the next coordinate.
, and then enter the
mark indicates is cleared.
Job Assembly
3
97