Machine Installation - Fuji Xerox DocuCentre-IV 3065 User Manual

Hide thumbs Also See for DocuCentre-IV 3065:
Table of Contents

Advertisement

1 Before Using the Machine

Machine Installation

1
18
Switch off and unplug the product when it (i.e., fax function) is not used over
weekends or long holidays.
Please note that it cannot receive fax message during switch-off.
Once a month, switch off this product and check if
the power cord is plugged firmly into an electrical outlet;
the plug is not excessively heated, rusted or bent;
the plug and electrical outlet are free of dust; and
the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first
and contact your local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power
cord. Friction or excessive pressure may generate heat and eventually cause
electric shock or a fire accident.
Never locate this product in the following places:
Near radiators or any other heat sources
Near volatile flammable materials such as curtains
In the hot, humid, dusty or poorly ventilated environment
In the place receiving direct sunlight
Near cookers or humidifiers
When moving this product, always carry it by a team of two or more persons to
avoid mishandling or injury.
The product weighs 62.7 Kg when Tray 1 being detached. Be sure to detach
Tray 1 before lifting up the product. Otherwise, it may cause injury.
When lifting this product, face the front panel and firmly grip the handholds
provided on both sides of the product. Never lift it by gripping any other areas.
It will prevent you from dropping the product and getting back ache or injuries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-iv 2060Docucentre-iv 3060

Table of Contents