Leica MX400 Operating Instructions Manual page 43

Operator's Manual
Velocity Made Good:
Beginning
Waypoint
Waypoint Closure Velocity:
Beginning
Waypoint
Effect of Set & Drift
Original Course Line
6297_01B.100
Below this information, you will find your Set and Drift data, which
is calculated using GPS and your compass and speed sensor inputs.
Reset XTE and Skip Waypoint, described at the end of NAV2, is
also available in NAV4.
The window on the right displays depth information which you
provide with the NMEA 0183 record of DPT, DBS, DBT, or DBK.
These are setup in the CFG1 Depth screen, refer to the Configura-
tion section of the manual and the Installation & Service Manual
for full details on depth data.
Below the depth data you will find the next route leg vector, the
Range to the waypoint and and Time To Go data, explained in the
NAV3 section.
30
Distance to
Waypoint Travelled
Original Course Line
Present
Position
SOG 13 Kn
WCV 9 Kn
WCV is based on
Extended Course
Line (COG), SOG,
BRG & RNG to WPT
Navigate
Next
Present
Position Waypoint
SOG 13 Kn
BRG
Effect of
Set & Drift
Next
Waypoint
HTS to
counter
Set & Drift
Version 3.3