Leica MX400 Operating Instructions Manual page 146

Configuration
Direction:
Sets all displays which indicate direction to True or Compass. If
you want the receiver to agree with your magnetic compass,
select Compass. The receiver will automatically add or subtract
the appropriate magnetic variation and deviation. Enter the
compass deviation table into the receiver in this screen. You can
differentiate between True and Compass settings by observing
the degree symbol on any bearing or heading display. True is
indicated by a degree symbol (°), Compass is indicated by a
degree symbol with a small c under the symbol ( c ).
XTE Limit:
Sets the distance left or right from the course line you consider
to be the maximum allowable off-track error (known as cross-
track error). The PLOT screens will display the scaled cross-
track error distance. The NAV screens will indicate the cross-
track error in numerical format and present the cross-track error
graphically scaled left or right of the course line.
XTE Alarm:
Causes an alarm to sound if your position exceeds the maximum
XTE Limit defined above when Yes is selected (the default
condition). To disable the alarm, select No with the Change
softkey.
WPT Pass Criterion:
Sets the waypoint passed determination method. There are five
methods available:
Complex:
Version 3.3
Operator's Manual
133