Leica MX400 Operating Instructions Manual page 200

Appendix D - Dual Control Head Mode
Data Base
Present Position
Time
Date
Routes
Waypoints
Reset XTE
DGPS Setup
Dual Control Alarms
Man Over Board
The items detailed in Table D-2 are independently controlled at the
individual receiver control heads.
Plotter Setup
GPS Engineering Display
Dual Control Setup
Lighting Setup
DGPS Displays (slave reflects
the conditions in master)
NMEA Out
Waypoint Sorting
Version 3.3
Table D-1. Master / Slave Common Data Base
Comments
Update once per second
Update once per second. Displayed in the
same mode on both units.
Only one unit can make changes at any given
time.
Only one unit can make changes at any given
time.
Only one unit can make changes at any given
time.
Only one unit can make changes at any given
time.
Only one unit can make changes at any given
time.
Table D-2. Independently Controlled Functions
Navigate Displays
Position Displays
Auxiliary Displays
Tide Displays
GPS Displays (slave reflects the
conditions in master)
Printer Out 2
Operator's Manual
187