Wpl - Waypoint Location - Nmea 0183 Standard; Wpl - Waypoint With Symbols & Description - Nmea 0183 Expanded - Leica MX400 Operating Instructions Manual

Waypoint
17: Checksum
can be set on or off (default on).

WPL - Waypoint Location - NMEA 0183 Standard:

Latitude and Longitude of specified waypoint. The content of this
sentence will normally be the position of the next waypoint in the
route.
The
CFG1 NMEA out WPL has a special "Send All" option.
Selecting this feature will send all the waypoints in the Waypoint
Bank once, independent of the WPL sentence setup as ON or OFF.
This format conforms to the NMEA 0183 standard.
WPL can be sent as version 1.5, 2.0 or 2.1.
field#: 2 3 4 5 6 7
³ ³ ³ ³ ³ ³
$GPWPL,llll.ll,a,yyyyy.yy,a,cccc*hh <CR><LF>
explanation / actual use:
2 & 3: Waypoint Latitude, North or South, N/S
number of decimals can be set to 2,3,4 or 5 (default 2).
4 & 5: Waypoint longitude, East or West, E/W
number of decimals can be set to 2,3,4 or 5 (default 2).
6. Waypoint identifier.
7: Checksum
can be set on or off (default on).
The WPL record can also contain the description information when
Include Waypoint Names in the CFG1 NMEA, Details is selected.
WPL - Waypoint With Symbols & Description - NMEA 0183 Expanded:
Latitude and Longitude of specified waypoint. The content of this
sentence will normally be the position of the next waypoint in the
route.
The CFG1 NMEA out WPL has a special "Send All" option.
Selecting this feature will send all the waypoints in the Waypoint
Bank once independent of the WPL sentence setup as ON or OFF.
This format does not strictly conform to the NMEA 0183 standard,
Version 3.3
Operator's Manual
65