Leica MX400 Operating Instructions Manual page 85

Operator's Manual
GOTO
Using the GOTO function key is the fastest way to create a single
leg route. Using this method will cause the existing active route to
be erased and overwritten with the new position you define.
1. From any screen, press the GOTO key.
2. Press the E key.
3. Select the waypoint determination method you want:
Waypoint Number - allows you to choose a waypoint stored in
the Waypoint Bank, where you enter the waypoint number
Choose in Bank - as used in the Route function (refer to Route -
Choose In Bank section of the manual), allows you to view
waypoints in the Waypoint Bank as a list.
Lat. Lon., Grid Point, Loran C TD's, Decca TD's - allows you
to define a coordinate and description, which is also stored at
the next available waypoint location in the Waypoint Bank,
Bearing Range - allows you to define a coordinate by specifying
the bearing and range from your present position, which is
also stored at the next available waypoint location in the
Waypoint Bank.
If you make a mistake, you can use the cursor key to position
the cursor over the mistake and over write the error.
Use the DGPS key or cursor key to insert a space in the descrip-
tion, if needed.
Use the CFG key to select a special character, if needed.
4. To activate the GOTO waypoint, press the E key. A warning is
briefly displayed indicating that the active route will be replaced
with the GOTO route.
72
GOTO
Version 3.3