Leica MX400 Operating Instructions Manual page 67

Operator's Manual
Lat/Lon (W84) - allows you to enter coordinates in the WGS 84
datum. This choice takes you directly into the coordinate
input screen. Go to step 5.
Lat/Lon Datum - allows you to choose a datum (see the list in
the screen sample above) from the more than 110 available
Datums. Highlight the desired datum and press the Select
softkey. Refer to Appendix A - Datum List, for a complete list
of datums and their WGS-84 offset. Go to step 5.
Range Bearing - allows you to define new waypoint coordinates
from an existing waypoint in the Waypoint Bank. When you
use this feature make sure you aligned the cursor next to the
from waypoint number before you pressed the Make New
WPT softkey.
Once you have entered the range and bearing, the receiver
calculates the coordinates. You can then enter a text
discription or modify the waypoint number as described in
step 6 below. Go to step 6.
4b.Edit This WPT - Select Accept to use the WGS 84 datum or
54
Waypoint
Version 3.3