Insert By Number - Leica MX400 Operating Instructions Manual

Operator's Manual
damage (i.e. erase waypoints in the Waypoint Bank, or routes in the
Route Bank), so have some fun and find out how helpful this GPS
receiver really is.
You might want to skip the examples which follow and jump ahead
to the Maneuvering Within The Route section later in this section to
understand some of the more advanced features of the software, if
you are already comfortable with setting up a basic route.

Insert By Number

The following example assumes RTE1 is empty. Follow the
directions in the Erasing An Existing Route section to start with an
empty route if you have waypoints in the RTE1 screen.
1. Select the RTE key until the RTE1 screen is displayed.
2. Press the E key to enter the edit mode.
3. Select Insert from the display. Skip to the next step if RTE1
is empty.
4. Select Insert By Number from the display.
5. Use the keypad to type in the number you want or the
beginning number of a range you would like to select from, or
use the cursor key to scroll through the previously stored
waypoints in numerical order.
38
Route
Version 3.3