Leica MX400 Operating Instructions Manual page 57

Operator's Manual
3. Then press the E key.
4. Use one or more of the insert methods described in the Creating
A Multi-Waypoint Active Route section above.
This example shows Waypoint 7 inserted into the route, using the
Insert By Number method:
5. Press the E key to end editing.
There is one special way to add a waypoint to the active route using
the Plotter display. This method adds the waypoint between your
present position and the next waypoint in your active route.
1. Select either PLOT1 or PLOT2 display.
2. Use the zoom-in or zoom-out softkeys to display the waypoint
you want to insert. Press the E key. All waypoints in the
waypoint bank will be displayed if they are within the zoom
level of the display.
Note that the waypoint must have a symbol as the first character
of the waypoint name in order for it to be displayed on the Plot
screen when the edit mode is not active.
44
Route
Version 3.3