Leica MX400 Operating Instructions Manual page 83

Operator's Manual
7. Press the E key
8. On the computer, double click on the Accessories icon
9. Double click on the Terminal icon
10.Click on the Settings menu
11.Double click on the Communications menu item and make the
following settings:
4800 baud
8 data bits
1 stop bit
Parity - none
Flow Control - none
Connector - Com1 (or Com2, depending where the external
interface is)
Parity Check - blank
Carrier Detect - blank
OK
12. Click on the Transfers menu
13. Double click on the Send Text File menu item and make the
following settings:
[select the correct file name.txt]
[select the correct location (folder) for the file]
check the Append LF box
OK
14.When all the waypoint sentences are sent, press the WPT key
and scroll through the list to ensure all the waypoints transferred
properly
70
Waypoint
Version 3.3