Goto O - Leica MX400 Operating Instructions Manual

GOTO
If you decide you don't want to continue with this function,
press the Escape softkey, then select another function key (i.e.
NAV) and your original route will have been left intact.
Press the RTE function key. You will see two waypoints defined in
the center of the screen.
Waypoint 0, the first waypoint, is your Point of Departure, or the
position you were at when you created the route. The receiver saves
and displays the original coordinates, date and time when you
created the route in Waypoint 0.
Waypoint 0 is displayed in Inverse Video, that is, white characters
on a black background (when in the normal Daylight display mode;
see CFG Lighting). This indicates that you have already passed this
coordinate. The time stamp at the lower portion of the description
window, indicates when the route was created.
To the right of the coordinate window of Waypoint 0, is a bent
arrow. The bend in the arrow is adjacent to the range and bearing
between the waypoint you just passed and the waypoint you are
approaching. Keep in mind that these are the fixed calculated values
between these two coordinates and not the real time changing
values that you will see in the navigate screens between your
present position and your next waypoint during normal navigation.
Version 3.3
Operator's Manual
73