C C (Clear); Cursor; N Av; Abc - Leica MX400 Operating Instructions Manual

Operator's Manual
for some reason that you don't want to use the changes you have
made, and you can't quite remember what the original information
was, pressing the Escape softkey will restore the original informa-
tion. However, once you press the E key, all changes are accepted
and the original data is lost.
C (CLEAR)
C
This function key is probably the least used of all the function keys;
however, it can save you some otherwise frustrating editing time.
This key allows you to erase or clear one character at a time. If you
hold it down for longer than one quick key press, it will erase the
entire line that the cursor is currently on.

CURSOR

This function key is the most used of all the function keys. As its
name suggests, this key is used to move between edit fields. You
will also find that this key allows you to move between function
screen pages (by pressing left or right). In addition, many of the edit
fields allow you to use either the cursor key or the Change softkey
to scroll through or select from predetermined choices.
1

FUNCTION

N AV

ABC

You might have noticed that above and below each primary
function key, there are numbers and letters. These numbers and
letters are used when you are in the edit mode. You will find that
they are most often used in the RTE, WPT, and CFG screens, but
they are used in other screens as well. If you are trying to enter
text, simply locate the desired letter and press the appropriate key
repeatedly until the appropriate letter or number appears. If you
accidentally go past the desired letter, repeat pressing the key and
the letter will come up again. You can toggle between upper and
lower case characters by pressing the key for a long period.
You will also find that some screens allow you to input symbols
into the text fields. These symbols are selected through a softkey
selection where symbols are allowed. Don't forget to press the E
function key to get out of the edit mode!
Another nice feature on this GPS receiver, is that successive
18
Keypad & Display Description
Version 3.3