Gps; Gps1 - Current Satellite Status; For 6 Channel Gps Models - Leica MX400 Operating Instructions Manual

GPS

GPS
There are two GPS screens in the receiver. The GPS functions are
highly interactive with these CFG1 menu selections:
Ø DGPS - sets the internal or external control for RTCM SC-104
corrections which affects your position accuracy and number of
satellites used in the position calculation
Ø GPS - sets the lowest elevation at which a satellite will be
tracked and applies an offset for calculating the GPS antenna
position if you can't physically locate the antenna exactly where
you want it (i.e. over the centerline of the boat)

GPS1 - Current Satellite Status

For 6 Channel GPS Models

There are two windows in this display, the left hand window is
divided into a graphical and digital display. The six graphic Power
Bars represent the six GPS receiver channels of the receiver. The
PRN (PseudoRandom Number) under each power bar represents the
satellite ID number assigned or being tracked on that channel. The
power bars indicate the valid receiver power range from 30 to 50.
Any portion of the power bar which is filled in, indicates that a
satellite is being tracked on that channel. If a power bar is empty,
but a PRN number is labeled under the power bar, then the identi-
fied satellite is not currently being tracked.
The text portion below the power bars provides some basic satellite
Version 3.3
Operator's Manual
103