Adding A Port - Leica MX400 Operating Instructions Manual

Tide
phone number provided at the back of this manual if you have not
received a copy of these tide table lists.

Adding A Port

To add a port to the list, first locate it in Part III of the tide table
book, then align the cursor with Add port to the Port List and press
E. The Zone in the upper left corner refers to the time zone offset to
UTC. Use the name given in the tide table for the name given in the
Place portion of the screen. To help you locate this port in the
printed volume later, use the table number given in the first column
of the manual as the tide number in the receiver.
Then simply follow along the table in the manual and enter the
appropriate offsets. The software is setup just like the manual. You
may encounter a table that requires seasonal offsets. Where these
Version 3.3
Operator's Manual
91