Printing A Test Label - Avery Dennison Monarch 9419 Manual

Menu Item Description
Online Setup Configuring the printer for use while connected to a host. Refer to the
Online Mode System Administrator's Guide.
Offline Setup Configuring the printer for use in offline mode (stand-alone mode)
when the printer receives data from a keyboard or scanner. The
printer is not connected to a host. Refer to the Offline Mode System
Administrator's Guide.
Media Setup Configuring the supply type and calibrating the sensors. Refer to the
System Administrator's Guide for your selected operating mode.
Communication Setting up serial or Ethernet communications. Refer to the System
Administrator's Guide for your selected operating mode.
Data Entry Select and enter data for pre-loaded formats. Refer to the Offline
Mode System Administrator's Guide.
Diagnostic Printing a test label or the printer's configuration, viewing printer
information, etc. Refer to the System Administrator's Guide for your
selected operating mode.
Advanced System settings such as date and time, display brightness, etc. Refer
Setup to the System Administrator's Guide for your selected operating mode.
Service Contains Service information, which requires a separate password to
access.
P r i n t i n g a T e s t L a b e l
From the Main Menu, select Menu.
1.
2. Press the navigation button until Diagnostics is highlighted. Press Select.
Press Select when Test Label is highlighted.
3.
Contains the printer's speed, contrast, inch counts.
Contains network configuration.
1-6 Equipment Manual
Contains the printer's MPCL packet configuration.
Refer to the Packet Reference Manual.