Care And Maintenance - Insportline IN 1920 User Manual

CARE AND MAINTENANCE

Your Air Magnetic Rower is made of the highest quality materials, it is still important that you take care of your
Air Magnetic Rower on a regular basis.
Your Air Magnetic Rower is for indoor use only and should NOT be used or stored in damp areas. Wipe all
perspiration from your Air Magnetic Rower after each use.
For safety, inspect your Air Magnetic Rower on a regular basis. When used in a light commercial environment
safety check and clean every day. When used in a domestic environment safety check and clean before use.
COMPONENTS MOST SUSCEPTIBLE TO WEAR
SEAT ROLLERS - ALUMINUM BEAM [part#001,118]
These parts are easily damaged by dust and dirt and should be cleaned regularly. The SEAT ROLLERS [118] are
hidden so all you can do is clean the ALUMINUM BEAM [001].Using a damp cloth wipe the top of the
ALUMINUM BEAM [001].Pay special attention to the outside edges. Check and remove any black spots.
DRIVE STRAP [part#709]
The DRIVE STRAP [709] is made of high quality nylon webbing which is extremely strong making it almost
impossible to break. Even so it is important to check the DRIVE STRAP [709] for wear. Check for nicks or cuts
and fraying that may weaken the integrity. Also check that the stitching at the handle bar end is intact. If any of
these symptoms are found discontinue use immediately and contact your dealer for a replacement DRIVE
STRAP [709].
FOOT REST Assembly [part#014,126,127,128,300,306,710]
The FOOT REST Assembly has a lot of moving parts. It is essential that these parts be in good condition at all
times. Check that the FOOT STRAP BUCKLE firmly holds the FOOT STRAP. Check that the HEEL
SUPPORT [126] self locking system is working correctly. Make sure that all Bolts are tight and firm. If any
defects are found discontinue use immediately and contact your dealer for replacement parts.
All FASTENERS [Nuts, Bolts, and Screws]
A lot of these parts are assembled by the consumer and should be checked regularly. Make sure that all Nuts,
Bolts and Screws are tight and firm.
GENERAL INFORMATION
The Air Magnetic Rower is designed for light commercial use ONLY and should not be used in a full
commercial, therapeutic or medical environment.
The official maximum load is 150kg. The Air Magnetic Rower has been tested and certified according to EN
957-1/A1 and EN 957-9, Class S.A.
The braking system is Speed Dependent. The stepping action is dependent. In the unlikely event that your Air
Magnetic Rower needs servicing, repairs or something is missing or broken then contact your dealer as soon as
possible. They should be able to help you immediately with any and all problems you have. If for any reason that
you are unsatisfied with the level of service or are unhappy with their cooperation, then you can contact the
manufacturer directly at the following contact details.
INFINITI FITNESS SYSTEMS
7F, No. 291 Ta Tun 4th Street
Taichung
Taiwan
TEL: +886-4-2258-3088
FAX: +886-4-2258-3137~8
E-mail: Sales@infinitifit.com
Web site: www.infinitifit.com
It is important to keep your purchase receipt! You may be asked to produce it too authenticate your Warranty.
The Warranty terms are provided by your dealer.
4