Trouble Shooting; Maintenance; Exercise Computer; Function Button - Insportline IN 2812 User Manual

Rowing machine insportline amazonian
Hide thumbs Also See for IN 2812:
Table of Contents

Advertisement

TROUBLE SHOOTING

Computer not working correctly. If your computer is not working correctly, please check whether the
lower wire is connected to the upper wire, and make sure that the upper wire is connected to the
computer. If you have checked for the above, and the computer still not working, then please make
sure the batteries are still working and are installed correctly in the computer.

MAINTENANCE

Before using the MAGNETIC ROWING MACHINE, always make sure all bolts/nuts are fully tightened.

EXERCISE COMPUTER

FUNCTION BUTTON

MODE PRESS TO SELECT FUNCTION OF COUNT, TIME, AND CALORIES
FOR PRESETTING.
RESET PRESS TO RESET EACH SINGLE FUNCTION OF COUNT, TIME,
AND CALORIES.
SET
PRESS TO SET COUNT, TIME, AND CALORIES.

FUNCTIONS

SCAN – Automatically scans each function in sequence.
COUNT UP – The monitor will display current stroke numbers from 0 to 9999.
COUNT DOWN - The monitor will start to count from pre-set stroke numbers down to 0 soon as
training starts.
TIME COUNT UP – The monitor will accumulate training time from 0:00 to 99:59.
COUNT DOWN - The monitor will start to count from pre-set time down to 0:00 as soon as training
starts.
TOTAL COUNT UP - the total working counts which will be kept displaying on the LCD to show the
user's total counts.
COUNT DOWN –The monitor will start to count from pre-set total countdown to 0:00 as soon as
training starts.
CALORIES COUNT UP – The monitor will accumulate calories consumption from 0 to 999 cal.
COUNT DOWN – The monitor will start to count from pre-set calories down to 0 as soon as training
starts.
(this data is a rough guide for comparison of different exercise sessions which cannot be used in
medical treatment).
Note:
Without signal transferred to the computer for 5 minutes, the LCD will shut off automatically to
conserve the battery power.
Press "mode „button or start exercise on the equipment shall turn the power on.
Press and hold "mode „button for 4 seconds, all value will be reset to zero.
The computer operates with 1 pc 1.5 v AAA size batteries.
13

Advertisement

Table of Contents
loading

Table of Contents