Table of Contents
Advertisement
STEP 2
Open the carton as shown in the diagram below.
NOTE: To protect the Air Magnetic Rower while assembling we suggest that you do not remove the Protective
Packing Material until it is absolutely necessary.
STEP 3
a) Place the MAIN FRAME [002] in the Carton Lid as shown in the diagram below.
b) Remove 4 x BOLT [300] from MAIN FRAME [002] with the TOOL provided.
c) Assemble the FRONT STABILIZER [005] with the same 4 x BOLT [300] and tighten firmly.
STEP 4
a) Remove the partly assembled Rower from the Carton Lid and place it the correct way up as shown in
the diagram below.
b) Remove the SAFETY STRAP HOLDER and discard. Place the HANDLE BAR in its HOLDER.
c) Remove 4 x BOLT [300] from MAIN FRAME [002] with the TOOL provided.
d) Assemble 2 x FOOT REST [013&014] with the same 4 x BOLT [300] and tighten firmly. Each FOOT
REST is marked Left and Right with "L" and "R" stickers.
39
Advertisement
Table of Contents
