Features - GRAPHTEC CUTTING PRO FC2250 Series User Manual

1.3 Features

•
The FC2250 series plotters provide a sharply-defined cutting edge.
•
The cutting force can be freely selected in a 40-step range (max. 9.8 N[1 kgf]).
The maximum cutting speed is 400 mm/s.
The high acceleration rate increases the overall cutting speed.
•
The FC2250 can cut not only marking film, but also thick paper, sandblast rubber and other media. Therefore,
signboards, artwork for production purposes and other signage can be easily produced.
•
The standard 2-Mbyte buffer RAM unit greatly reduces the load on the host computer.
•
The FC2250 series uses a digital servo drive system for highly precise cutting results at high speed.
•
Cutter blade replacement is straightforward.
Chapter 1 PRODUCT SUMMARY
1-3