User Guide
D.2 Setting up iSCSI Software Initiator
Settings for the Windows Server 2008 R2 environment are described below.
D.2.1 Overview
Perform the following steps to connect the application server and disk array in Windows environments.
Release 6.0
Appendix D How to Set/Check Application Server (Windows) (iSCSI HW Initiator)
Confirm that an LD set has been created by iSM.
For details, refer to the Configuration Setting Tool
User's Manual (GUI) for the M Series.
Log on to the target.
For details, refer to
Windows Environments
Confirm that the OS recognizes the logical disk.
For details, refer to
Steps in Windows
Check PathManager settings and status.
For details, refer to
PathManager Settings and
If PathManager will not be used, this step is not
necessary.
369
Section D.2.2: Logon Steps in
Section C.3.2: Confirmation
Environments.
Section C.3.3: Check the
Status.