Figure 1: Example Of Recommended Configuration - NEC Storage M100 Series User Manual

User Guide
This document describes how to set up the NEC Storage M series for the first time in the recommended
configuration illustrated in Figure i. For use in a different environment, modify the setup procedure as needed.
For details about software products, see manuals attached to the software products.
You may ask your maintenance service provider to perform the setup described in this document.
Remarks
This document provides information on functions achieved by the following program products:
 NEC Storage Manager Express
 NEC Storage PathManager
This document supports the following versions of the program products.
 NEC Storage Manager Version 7.4
 NEC Storage PathManager 5.0 for Windows
 NEC Storage PathManager 5.2 for Linux
If you are using a product of an older version, see the user's guide of the product.
Unless otherwise specified, 1 KB stands for 1024 bytes in this document.
Keep this document nearby as a handy reference.
Release 6.0

Figure 1: Example of Recommended Configuration

20
Introduction