Figure 8-11: Removing The Battery - NEC Storage M100 Series User Manual

User Guide
4. Insert a new battery.
Insert the battery connector into the controller connector and lock it securely. The battery will be
firmly in place.
5. Install the controller cover.
Fit the edges of the cover to the grooves in the controller while aligning with the cover's side lock
position and cover the controller.
Slide and close the cover.
6. Insert the controller.
See Section 8.3.2:
Release 6.0

Figure 8-11: Removing the Battery

"Controllers".
258
Chapter 8 Installing Optional Parts