User Guide
3. On the General tab of the Advanced Settings screen, change the following settings. When
finished, click the OK button.
Settings for Connect using
Select the iSCSI Adapter from the Local adapter drop-down list.
Select the IP address of the local server from the Initiator IP drop-down list.
Select the IP address of the disk array host port (iSCSI port) from the Target portal IP
drop-down list.
To use CHAP
Select the Enable CHAP log on option.
Enter password to be assigned to target in Target secret.
Select Perform mutual authentication option when using mutual CHAP authentication.
Release 6.0
Appendix D How to Set/Check Application Server (Windows) (iSCSI HW Initiator)
Figure D-17: Advanced Setting - General Tab
372