Using The Initialization Wizard To Modify The Configuration; Modifying The Disk Array Configuration; Figure 9-6: Message Asking Whether To Stop Monitoring; Table 9-2: Relation Between The Initialization Wizard And Configuration Settings - NEC Storage M100 Series User Manual

User Guide

9.3.2 Using the Initialization Wizard to Modify the Configuration

The configuration can be modified by re-running the initialization wizard.
The procedure is the same as the procedure for the first settings. For details of the procedure see,
Section 6.2.1: "Initialization Wizard".
When you re-run the initialization wizard, NEC Storage Manager issues a message asking whether to
stop monitoring of the target disk array by NEC Storage Manager and to proceed with the initialization.
Click Yes and stop monitoring of the disk array to modify the configuration.

9.3.3 Modifying the Disk Array Configuration

Each setting configured by the initialization wizard can be modified individually.
See

Table 9-2: Relation between the initialization wizard and configuration settings

settings configured in the initialization wizard and configuration settings are related.
Table 9-2: Relation between the initialization wizard and configuration settings
Setting in the initialization wizard
Set Disk Array Subsystem Name
Time Settings
Setting host connection port parameters
(iSCSI)
Setting iSNS server
License Unlock
Release 6.0

Figure 9-6: Message Asking Whether to Stop Monitoring

269
Chapter 9 Changes to the Configuration
How to modify the setting
Select Disk Array > Disk Array Management >
Change of Settings.
Select Disk Array > Time Settings.
Select Disk Array > Host Connection Port > Host
Connection Port Settings (iSCSI).
Select Disk Array > iSNS Server Settings.
Select Disk Array > License Unlock.
to find how the