Figure 8-3: Inserting The Front Bezel (2); Figure 8-4: Removing The Front Bezel - NEC Storage M100 Series User Manual

User Guide
3. Catch the right side of the front bezel, too. Then lock it by turning the key counterclockwise.
Installation of the front bezel is now complete.
Removing a front bezel
The procedure for removing a front bezel is as follows:
1. Release the lock by turning the key clockwise.
2. Pull the right side towards you by pivoting the left end, detach the left side, and pull the entire bezel
towards you.
Release 6.0

Figure 8-3: Inserting the Front Bezel (2)

Figure 8-4: Removing the Front Bezel

252
Chapter 8 Installing Optional Parts